How-To Guide

How do you set up creator discount codes and read the results?

Give each creator one limited code and a tagged link, brief the disclosure, then read orders, new buyers and leaks. Steps, a worked example and a sheet.

9 min read

Give each creator their own code in your store, limited by dates, total uses and one use per customer. Pair it with a tagged link, put the disclosure wording in the brief and check the live post. After 30 days, read four numbers per code from your own order list: orders and net revenue after discount and refunds, new against repeat buyers, link-matched against code-only orders, and orders on days with no post. A code shows what a shopper typed at checkout; it does not prove the creator caused the order.

  • One code per creator, with an end date, a use cap and one use per customer, keeps a leak cheap.
  • At 15 percent off a $50 item that costs $22 to make and ship, about 27 of every 100 code orders must be extra buyers to cover the discount (an illustration).
  • FTC staff say a personalised code may not disclose a financial relationship on its own.

What a creator discount code does, and what it cannot prove

A creator discount code is a code you give to one creator, which a shopper types at checkout to get money off. The code does two jobs: it gives the shopper a reason to buy, and it lets you count whose code was used, which is what Shopify's Sales by discount report does for each code. Shopify's help page describes discount codes as the method commonly used for specific marketing, such as email campaigns or partnerships.

That record is thinner than it looks. A code shows that someone typed it, not that the creator caused the order. A shopper can find the code on a coupon site, a friend can pass it on, and a loyal customer can use it on an order they would have placed anyway. Modash surveyed influencer marketers and reports that 47.6% called code poaching an active problem in their programs. That is one vendor's survey, not an industry rate, but it is a reason to set each code up so a leak costs little.

The fix is to pair the code with a second signal, a tagged link, and to read the two together. They catch different things.

Discount codeTagged link
What it recordsA completed order that carried the code. Shopify's Sales by discount report shows how often each code is used.A visit that arrived with tracking values. A Shopify shareable discount link can add a marketing campaign's UTM values.
What it missesBuyers who forget the code or mistype it.Places where nobody can click, and buyers who come back on another device.
What it can over-creditLeaked codes, repeat customers, shoppers who search for any discount.A visit from someone who was going to buy anyway.
Where it works bestPodcasts, video, Stories and group chats, where Post Affiliate Pro notes that people cannot click.Posts where the link can sit in a clickable place, such as a bio or a link sticker.
Three horizontal bars show that on a $50 item costing $22 to make and ship, 17.9 of every 100 code orders must come from extra buyers at 10 percent off, 26.8 at 15 percent off and 35.7 at 20 percent off.

Fictional illustration on a $50 item that costs $22 to make and ship; each bar is the share of 100 code orders that must be extra buyers. Original diagram from this guide's own margin arithmetic, with commission and fees left out.

Superdirector

Make it work for your brand

Find it. Remake it. Post it. Superdirector turns the viral formats in your niche into your brand's carousels, X posts and video scripts, and keeps the calendar full.

Work out what a code can cost before you offer one

A code lowers the price of every order that uses it, including orders that would have happened anyway. So set the depth from your margin before you set it from what feels generous. Two vendor guides, Impulze and Modash, put the sweet spot, or the usual range, at 10 to 20 percent off. Neither shows a test, and Modash itself says there is no rule of thumb.

Here is the arithmetic, with fictional numbers. An item sells for $50 and costs $22 to make and ship, so a full-price order leaves $28. A 15 percent code takes off $7.50. Each code order from a buyer who would not otherwise have bought leaves $20.50. Each code order from someone who would have bought anyway loses $7.50. The code pays for itself only when enough orders are the first kind: the discount divided by the full-price margin, $7.50 ÷ $28, is 26.8 percent.

Discount on a $50 itemPrice paidLeft after $22 costShare of code orders that must be extra buyers to break even
10 percent$45.00$23.0017.9 percent
15 percent$42.50$20.5026.8 percent
20 percent$40.00$18.0035.7 percent

These numbers are an illustration. They leave out shipping the buyer pays, payment fees and any commission, so use your own price and cost. If you pay a commission on code orders, each break-even share rises.

If you pay a commission, write the terms down before launch. Post Affiliate Pro lists three terms brands often leave open: which amount the commission is paid on, how long it is held, and how refunds and chargebacks are treated. Its own example is a campaign where nobody had agreed whether the commission came off the price before or after the discount. As one example of a platform default, Shopify Collabs lets the merchant set a holding period of 1 to 90 days and cancels the commission when an order is fully refunded inside it. This guide names no commission rates, because the right terms depend on your margin and agreement.

Last, make the creator's code the best offer a shopper can find. Modash points out that a shopper who sees a bigger discount in a welcome message will take it, and the creator loses the credit. Check the code against your sitewide sales first. The guide to creator codes and automatic Shopify sales shows how to test a combination in a real basket.

Create one limited code per creator

Make one code per creator, never one shared code. A shared code can show that an offer worked, but it cannot show who sent the buyer. Choose a readable word, such as the creator's name plus a word about the product. Keep special characters out: Shopify says to avoid them so the code name is added correctly to the checkout URL. Leave the percentage out of the name if you may change the depth later, because a code called MIA15 is wrong the day the discount becomes 10.

Then set the limits. This table shows where each of three common platforms puts them. Every setting comes from the platform's own help page.

One trap in Shopify: a one-use-per-customer limit belongs to that discount. If you delete a code and add a duplicate with the same limit, customers who used the old one can use the new one once. To retire a leaked code, deactivate it and give the creator a new name.

Decide whether repeat customers should get the code. A code that works on every order credits the creator for buyers who were coming back anyway. If your goal is new buyers, limit it to first orders: Stripe has a first-time setting, and in Shopify a customer segment with number_of_orders = 0 targets people who have not bought before.

A creator post sends a code to checkout and a tagged link to a tagged visit, and both meet in your order list, where four reads are made: orders, new against repeat buyers, link-matched against code-only orders, and orders on days with no post.

Where the code and the tagged link meet, and the four reads taken from the joined order list. Original diagram from this guide's setup and read steps; no real brand or result shown.

Brief the creator and check the disclosure

Tell the creator in writing how to disclose. The FTC's influencer guidance says that a creator who is given free or discounted products or other perks, and then mentions the brand, should make a disclosure even if nobody asked for the mention. It says to place the disclosure where it is hard to miss and not to mix it into a group of hashtags or links. Plain words such as "ad" and "sponsored" count; vague ones such as "collab" do not.

A personalised code is not a safe substitute. In its Endorsement Guides Q&A, FTC staff say a clearly personalised code probably shows that a relationship exists, but whether it shows a financial one is less clear. When it is not obvious what consumers understand, staff recommend erring on the side of disclosure.

The brand shares the responsibility. 16 CFR 255.1(d) says advertisers should give endorsers guidance on disclosing unexpected material connections, monitor their compliance and act on non-compliance. The FTC's Endorsement Guides Q&A adds that if law enforcement becomes necessary, its focus will usually be on advertisers or their ad agencies and public relations firms. In the UK, the ASA's guidance says the business and the affiliate are both responsible under the CAP Code, and that the Code covers text with a promotional code attributable to a specific affiliate. This guide is not legal advice.

Put the exact wording in the brief, for example "ad" or "sponsored" at the start of the caption and in the video, before the code. After the post goes live, check the video, the caption and the platform label separately, as the creator disclosure check describes.

A do-and-don't matrix for a creator disclosure: say ad or sponsored rather than collab, put it at the start of the caption and in the video rather than inside hashtags or links, and check the live video, caption and platform label rather than relying on the code alone.

Three disclosure checks from FTC staff guidance, set as what to do and what to avoid. Original diagram from that guidance; the live check is this guide's own advice, not legal advice.

Read four numbers per code after 30 days

Thirty days after the first post, build one row per code from your own order list, not from a dashboard. The tracking sheet has the columns for the setup and the four reads. This table shows the reads on a fictional code, MIATEA: 15 percent off, no first-order limit, 30 days, an average basket of $55, and three posts by the creator on days 1, 10 and 20.

ReadFictional exampleWhat it tells youWhat to do with it
1. Orders and net revenue42 orders. $2,310 before discount, $346.50 discount ($8.25 an order), $1,963.50 after. 3 refunded orders take off $140.25, leaving $1,823.25.The revenue the code brought after the discount and refundsCompare it with your own cost of the partnership and the margin check in step 1
2. New against repeat buyers36 first-time buyers, 6 repeat (14 percent)Repeat buyers were coming back anywayIf repeat orders are a large share, limit the next code to first orders
3. Link-matched against code-only25 of 42 orders (60 percent) had a matching tagged visit; 17 were code onlyCode-only orders rest on the code alone; the buyer forgot the link, or the code travelledLook at when the code-only orders arrived
4. Orders on days with no post9 of 42 (21 percent) landed on days 27 to 29, a week or more after the last post, none with a tagged visitA cluster with no post and no visit looks like a leakSearch for the code on coupon sites, then deactivate it and issue a new name

The prompts in the last column are ours, not a platform's or a regulator's. Treat each as a reason to look, not a verdict. If an order appears in both a code report and a link report, count it once: this guide shows the join, and this one sorts each order into code and link agree, code only, link only, conflicting creators or unresolved.

Write down how each read is calculated, so you and the creator read the same number the same way:

  1. Net revenue is the order value before discount, minus the discount, minus what refunded orders had paid. For MIATEA: $2,310 minus $346.50 minus $140.25 is $1,823.25.
  2. Repeat share is repeat buyers divided by code orders: 6 ÷ 42 is 14 percent.
  3. Link-matched share is code orders with a tagged visit from the same creator, divided by code orders: 25 ÷ 42 is 60 percent.
  4. No-post share is code orders that landed more than two days after the latest post, divided by code orders: 9 ÷ 42 is 21 percent.

Let your goal pick which read decides the next code. If you want new buyers, read 2 decides: a high repeat share means the next code should be first orders only. If you want revenue you can pay a partner from, read 1 decides. If you suspect a leak, read 4 decides. The chart after this section plots MIATEA's orders by day so you can see what a leak looks like.

Know what the numbers cannot tell you. They cannot show whether a buyer would have bought without the code; only a comparison you design, such as a period with no code, gets near that, and it is rough. They will also undercount, because some buyers forget the code and never click the link. Use the result to keep, limit or end a code. Do not use it to promise a creator a precise share of credit.

After the first read, recheck every live code once a month: is it still active and inside its end date, does a search for the code name turn it up on coupon sites, and is the disclosure still on the post? A code you forget about keeps giving a discount long after the campaign ends.

A 30-day strip marks the fictional MIATEA code's posts on days 1, 10 and 20, then totals 42 orders as 25 with a tagged visit and 17 code-only, with a cluster of 9 code-only orders on days 27 to 29 bracketed as a likely leak.

The fictional MIATEA code: three post days, 42 orders, and the nine code-only orders that arrived a week after the last post. Original diagram from this guide's 30-day read; not real data.

Where Superdirector fits

Superdirector, which publishes this guide, does not create, track or pay discount codes; that all stays in your store. It covers the content side of the same plan. On the $199/month plan it runs one brand's social account: it watches the niche on Instagram, TikTok, YouTube and X, remakes formats that are taking off as carousels and X posts in your brand, and posts Instagram carousels and single X text posts once posting is on for the account, which asks one answered warning and nothing else, so a post can carry your code and its disclosure. It can also find and screen creators. The $29/month plan is the hands-on entry, used from Claude or ChatGPT. AI video and full autopilot are coming soon, and you remain the publisher. Compare the two plans.

Frequently asked questions

How do you set up creator discount codes and read the results?

Give each creator one code with dates, a use cap and one use per customer, pair it with a tagged link, put the disclosure wording in the brief, and after 30 days read four numbers from your own order list: orders and net revenue after discount and refunds, new against repeat buyers, link-matched against code-only orders, and orders on days with no post. A code shows what was typed at checkout. It does not prove the creator caused the order.

Should each creator get their own discount code?

Yes. A shared code can show that an offer worked, but only a code per creator shows who it came from. Limit each one by dates, total uses and one use per customer, so a leak costs little and one code can be switched off without touching the others.

Should a creator code come with a tracking link?

Yes, wherever the creator can post a link. The code is typed by the buyer and the link carries the visit, so each covers what the other misses. Where nobody can click, such as a podcast, the code does the work. Count an order that shows up in both reports once.

How big should a creator discount be?

Set it from your margin. On a $50 item that costs $22 to make and ship, a 15 percent code pays for itself only if about 27 of every 100 code orders are buyers who would not otherwise have bought; at 10 percent it is about 18 and at 20 percent about 36. Those figures are an illustration and leave out commission. Two vendor guides put the usual range at 10 to 20 percent without showing a test.

Do creators have to disclose a discount code?

If a creator gets something of value from the brand, such as free or discounted products, or earns from the code, the FTC says to disclose the relationship, and its staff say a personalised code may not be clear enough on its own. In the UK the ASA says the brand and the affiliate are both responsible. Check the live post. This is not legal advice.

Related practical guides

Set up one code this week

Pick one creator, create one limited code and one tagged link, put the disclosure wording in the brief, and put the 30-day read in your calendar.